Peerless-AV HLG452-PH-Q10 - Installation - Manual (Page 2)

ISSUED: 08-25-09 SHEET #: 090-9188-3 09-14-11
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
2 of 5
NOTE: Read instruction sheet before you start installation and assembly.
Parts may appear slightly different than illustrated.
A
D
Accessory
• ACC939 - 1/4-20 x 2.25" carriage screws for
thicker desktop surfaces
• ACC943: Installation Template (plate only)
E B C F G H I
Tools Needed for Assembly
• drill
• 1/4" drill bit
• 5/8" open box wrench
• phillips screwdriver
Qty. Part # Qty. Part #
A lock-down plate 1 090-1757 10 090-1757
B 1/4-20 x 1 3/4" carriage bolt 2 520-1017 20 520-1017
C plastic cap 2 590-1294 20 590-1294
D 1/4-20 slope nut 3 530-0035 23 530-0035
E M6 x 8 mm socket pin screw 2 520-1255 20 520-1255
F M5 x 25 mm socket pin serrated washer head 2 510-1122 20 510-1122
G M6 x 20 mm socket pin serrated washer head 2 510-9554 20 510-9554
H 4 mm allen wrench 1 560-9646 3 560-9646
I #10 washer 2 540-9400 20 540-9400
Parts List
Description
Before you begin, make sure all parts shown are included
with your product.
HLG452-PH-Q10 HLG452-PH