Warning, Fg or e i, 26" and 32" screens – Peerless-AV HLG452-PH-Q10 - Installation User Manual
Page 5
ISSUED: 08-25-09 SHEET #: 090-9188-3 09-14-11
Visit the Peerless Web Site at www.peerlessmounts.com
For customer care call 1-800-729-0307 or 708-865-8870.
5 of 5
Slide screen onto base until holes align as shown in figure 5.1. Attach screen to stand using two M5 x 25 mm
socket pin serrated washer head screws (
F) and flat washers (I) as shown in figure 5.2. Tighten with 4 mm allen
wrench (
H). Use Screws supplied with TV for remaining mounting holes.
• Do not overtighten! Overtightening may cause permanent damage to the screen. Torque to 26-35 in • lb (30-40 kg • cm).
WARNING
fig 5.1
fig 5.2
F
I
26" and 32" Screens
Place screen attachment arm on to base of stand and
secure using two M6 x 20 mm socket pin serrated
washer head screws (
G) or two M6 x 8 mm socket
pin screws (
E). Use Screws supplied with TV for
remaining holes. Tighten with 4 mm allen wrench (
H).
6
Slide screen onto adapter tubes. Secure using two
M5 x 25 mm socket pin serrated washer head screws
(
F) and washers (I). Use Screws supplied with TV for
remaining holes. Tighten with 4 mm allen wrench (
H).
F
G or E
I
BASE
NOTE: Screws are installed at a diagonal.
NOTE: base may appear different
than illustrated.
7
37" to 52" Screens
NOTE: Screws are installed at a diagonal.
NOTE: Screws are installed at a diagonal.
NOTE: display and
base may appear
different than
illustrated.
NOTE: display and base may
appear different than illustrated
5
Installation of Security Screws for Base/Screen Assembly
Securing Attachment Arm to Base
Securing TV to adapter tubes
ATTACHMENT
ARM
ADAPTER
TUBE
© 2011, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.