Peerless-AV SS560G - Installation - Manual (Page 13)

13 of 41 ISSUED: 02-25-11 SHEET #: 009-9051-3 05-16-12
Mounting and Removing Flat Panel Display
Hook adapter brackets (G) onto universal plate (F),
then slowly swing display in as shown. Turn screws
of adapter brackets (G) clockwise at least six times
to prevent display from being removed as shown in
detail 4.
NOTE: Tighten using 4 mm allen wrench (R).
Display can be adjusted horizontally if desired.
NOTE: It is important to lock display down!
To lock the display down, fully tighten screws to
adapter bracket as shown in detail 4.
To remove display from mount, loosen screws,
swing display away from mount, and lift display off
of mount.
15
G
DETAIL 4
SCREWS
F
G
F
Run cords through upright (H) using cord management holes.
16
CORD
MANAGEMENT
H
Cord Management
• Always use an assistant or mechanical lifting equipment to safely lift and position the plasma television.
WARNING
© 2011, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.
Peerless Industries, Inc.
2300 White Oak Circle
Aurora, Il 60502
www.peerlessmounts.com