Peerless-AV SS560G - Installation - Manual (Page 8)

8 of 41 ISSUED: 02-25-11 SHEET #: 009-9051-3 05-16-12
I nsert three button bumpers (K) into bottom of shelf clamp bracket (D).
Attach shelf clamp bracket (D) to shelf support (C) using two 1/4-20 x 20 mm screws (AA) and two
1/4-20 nuts (M).
For additional shelf installation, repeat steps 4 through 6.
Insert six button bumpers (K) into shelf support (C). Place glass shelf (I) on shelf support.
I
K
C
6
6-1
K
6A
6-2
Attaching Glass Shelf
D
C
AA
M
• Do not overtighten, may cause glass to shatter or
crack.
• This shelf is intended for use with equipment
weighing NO more than 50 lbs. (22.7 kg) that fi ts
evenly accross the surface of glass shelf (I). Use
with other equipment may result in instability and
cause personal injury or property damage.
WARNING