Peerless-AV SS560G - Installation - Manual (Page 6)

6 of 41 ISSUED: 02-25-11 SHEET #: 009-9051-3 05-16-12
Attach upright (H) to base (E), as shown in fi g 3.1 using three 3/8-16 x 2.5" socket screws (O) and M10 x .402ID
lock washers (Y). Tighten screws using 7/32" allen wrench (P).
NOTE: Be sure cord management holes are in the confi guration shown in fi g 3.2.
3
Loosely attach four 1/4-20 x 12 mm screws ( L ) and 1/4-20 nuts ( M ) to shelf support (C) . 4
C
L
M
fi g. 3.2
CORD
MANAGEMENT
HOLES
O
E
H
Y
fi g. 3.1