Peerless-AV PJF2-UNV-S - Installation User Manual
Page 6
ISSUED: 01-14-09 SHEET #: 056-9018-2 05-18-10
Visit the Peerless Web Site at www.peerlessmounts.com
6 of 9
For customer care call 1-800-729-0307 or 708-865-8870.
Screw ball and socket mount (
A) into ceiling plate (C) as shown in figure 3.1. Align the notch with one of the four
holes of the ceiling plate (
C) and secure ball and socket mount (A) with a M5 x 10 mm socket pin screw (E) using
security allen wrench (
U) as shown in figure 3.2
NOTE: Slotted set screw (L) is used to jam against the threads of the ball and socket mount to prevent any excess
movement of the ball and socket mount (
A). Do not overtighten screw; overtightening screw will damage threads
making it difficult to separate the products.
Skip to step 5.
Flush Mount Application
A
C
A
E
WOOD JOIST
CEILINg
NOTCH
C
L
3
figure 3.1
figure 3.2