Peerless-AV LCC-36S - Installation - Manual (Page 12)

12 of 12 ISSUED: 09-27-04 SHEET #: 100-9004-8 10-08-12
Installation of Screen in the Horizontal Position
Insert two M5 x 12 mm screws (F) into column bracket of tube assembly (A) (see fi gure 5.1). Leave approximately
3/16" of thread exposed (see fi gure 5.2).
3/16"
EXPOSED
THREAD
COLUMN
BRACKET
Hook tilt bracket (C) onto column bracket (see fi gure 6.1). Secure with two M5 screws (F) (see fi gure 6.2). Adjust
tilt (20° forward and 5° back) and swivel to desired position. Tighten all screws using security allen wrench (G).
Note: Cable ties (Q) are provided for optional cord management along tube.
COLUMN
BRACKET
C
• Always use an assistant or mechanical lifting equip-
ment to safely lift and position the LCD screen.
WARNING
F
F
fi g. 5.1 fi g. 5.2
fi g. 6.1
fi g. 6.2
5
6
© 2012, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.