Peerless-AV LCC-36S - Installation - Manual (Page 8)

8 of 12 ISSUED: 09-27-04 SHEET #: 100-9004-8 10-08-12
Installation to Extension Column
Screw extension column (EXT or ADJ
Series) to ceiling plate (B). Align the
notch with one of the four holes in the
ceiling plate and secure extension
column with a M5 x 10 mm socket pin
screw (P) using security allen wrench
(G). See fi gure 3.5.
Note: Slotted set screw (N) is used to
jam against the threads of the reducer
to prevent any excess movement of the
extension column. Do not overtighten
screw; overtightening screw will damage
threads making it diffi cult to separate the
products.
Screw extension column connector
(ACC109) to extension column. Align
slot in extension column with one of the
top holes in extension column connector.
Insert and tighten one #10-32 x 3/8"
socket pin screw provided with projector
through extension column connector into
slot on extension column using security
allen wrench (G). See fi gure 3.6.
Screw reducer (D) to extension column
connector. Align reducer to one of
the bottom holes in extension column
connector. Insert and tighten one #10-
32 x 3/8" socket pin screw provided with
connector through extension column
connector into slot in reducer using
security allen wrench (G). See fi gure 3.7.
Note: Slotted set screws provided with
extension column connector are used
to jam against the threads of each
connecting joint to prevent any excess
movement. Do not overtighten screws;
overtightening screws will damage
threads making it diffi cult to separate the
products.
Skip to step 4 on page 10.
D
SLOT
SLOT
SLOT
B
SLOT
fi g. 3.5
P
B
D
N
fi g. 3.6
fi g. 3.7
EXTENSION COLUMN
CONNECTOR (SOLD
SEPARATELY)
SOCKET PIN
SCREW
SOCKET PIN
SCREW
EXTENSION COLUMN
(EXT or ADJ Series)
Sold Separately
EXTENSION
COLUMN
EXTENSION
COLUMN
SET SCREW
SET SCREW
EXTENSION
COLUMN
ACC109
ACC850 - EXTENSION COLUMN
CONNECTOR WITH CORD MANAGEMENT
- MAY BE USED IN PLACE OF EXTENSION
COLUMN CONNECTOR. (SOLD
SEPARATELY)
ACC109
3