Peerless-AV HT642-004 - Installation - Manual (Page 10)

10 of 10 ISSUED: 09-20-11 SHEET #: 125-9245-1
Attach two M5 x 12 mm serrated washer head
socket pin screws ( J) to the bottom holes on the
sides of wall plate ( C) using the 4mm security allen
wrench ( G) provided.
Position slots of adapter brackets ( A and B) onto
the two M5 x 12 mm serrated washer head socket
pin screws ( J) attached to wall plate (C).
4 4-1
J
C
J
A and B
SLOT
C
Attaching Mounting Bracket Using Tilt Option
To secure wall plate ( C) to adapter plates (A and B), adjust tilt as desired and attach two M5 x 12 mm serrated
washer head socket pin screws ( J) into the slots on the sides of wall plate (A) and threaded inserts of adapter
brackets ( A and B). Tighten with the 4 mm security allen wrench (G).
4-2
J
J
MOUNTING SURFACE
NOT SHOWN FOR CLARITY
BOTTOM OF DISPLAY
© 2011, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.
A
B
C