Peerless-AV HT642-004 - Installation - Manual (Page 9)

9 of 10 ISSUED: 09-20-11 SHEET #: 125-9245-1
MOUNTING SURFACE
NOT SHOWN FOR CLARITY
Position slots of adapter plates ( A and B) onto the
four M5 x 12 mm serrated washer head socket pin
screws ( J) attached to wall plate (C).
To secure wall plate ( C) to adapter plates (A and B), attach two M5 x 12 mm serrated washer head socket pin
screws ( J) through the slots on the sides of wall plate (C) and threaded holes of adapter plates (A and B). Tighten
with the 4 mm security allen wrench ( G).
Attach four M5 x 12 mm serrated washer head
socket pin screws ( J) to the holes on the sides of
wall plate ( C) using the 4mm security allen
wrench ( G) provided.
4
Attaching Mounting Bracket Using Hook On Option
4-1
J
C
J
A and B
SLOT
J
A
B
C
4-2
BOTTOM OF DISPLAY
J
J
C