Peerless-AV SR1G - Installation - Manual (Page 13)

13 of 13 ISSUED: 01-10-07 SHEET #: 009-9033-12 01-11-11
© 2007 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
Mounting and Removing Flat Panel Screen
Hook adapter brackets (G) onto universal plate (F), then
slowly swing screen in as shown. Turn screws of adapter
brackets (G) clockwise at least six times to prevent
screen from being removed as shown in detail 4.
NOTE: Tighten using 4 mm allen wrench (R).
Screen can be adjusted horizontally if desired.
NOTE: It is important to lock screen down! To lock
the screen down, fully tighten screws to adapter bracket
as shown in detail 4.
To remove screen from mount, loosen screws, swing
screen away from mount, and lift screen off of mount.
15
G
DETAIL 4
SCREWS
F
G
F
Run cords through upright (H) using cord management holes.
16
CORD
MANAGEMENT
H
Cord Management
• Always use an assistant or mechanical lifting equipment to safely lift and position the plasma television.
WARNING