Peerless-AV SR1G - Installation - Manual (Page 8)

8 of 13 ISSUED: 01-10-07 SHEET #: 009-9033-12 01-11-11
I nsert three button bumpers (K) into bottom of shelf clamp bracket (D).
Attach shelf clamp bracket (D) to shelf support (C) using two 1/4-20 x 20 mm screws (AA) and two
1/4-20 nuts (M).
For additional shelf installation, repeat steps 4 through 6.
Insert six button bumpers (K) into shelf support (C). Place glass shelf (I) on shelf support.
I
K
C
6
6-1
K
6A
6-2
Attaching Glass Shelf
D
C
AA
M
• Do not overtighten, may cause glass to shatter or
crack.
• This shelf is intended for use with equipment weighing
NO more than 50 lbs. (22.7 kg) that fi ts evenly accross
the surface of glass shelf (I). Use with other equipment
may result in instability and cause personal injury or
property damage.
WARNING