Peerless-AV SR1G - Installation - Manual (Page 9)

9 of 13 ISSUED: 01-10-07 SHEET #: 009-9033-12 01-11-11
Insert two 1/4-20 x 12 mm screws (L) into screen
mount bracket (A), leaving 3/16" of exposed thread
as shown in fi gure 10.1 and detail 3.
J
H
Snap top cover (J) onto upright (H).
10 9
fi g. 10.1
DETAIL 3
L
A
Loos ely attach six 1/4-20 x 12 mm screws (L),
washers (N), and 1/4-20 nuts (M) to screen mount
bracket (A).
7
S lide screen mount bracket (A) onto upright (H) so
that 1/4-20 nut s (M) slide into slots of upright (H) as
shown in fi gure 8.1 and detail 2. Slide screen mount
bracket to desired position, level, then tighten 1/4-20
x 12 mm screws (L) using 4 mm allen wrench (Q).
8
L
A
M
A
H
SLOT
fi g. 8.1
L
DETAIL 2
M
H
3/16"