Ingalls 38525 - Manual (Page 3)

Ingalls Engineering Co., Inc. ● 2011 Cherry Street, Suite 104 ● Louisville CO 80027
(800) 641-9795 ● (303) 665-7800 ● Fax: (303) 665-7810 ● www.ingallseng.com
Step 5: With the control arms installed and bolts torqued,
attached the emergency brake lines at the rear caliper and
using the supplied ty-raps, loosely attached the brake lines to
the control arms similar to the OEM attachment. It is
important to loosely attach the lines with ty-raps to allow for
the natural pivoting of the control arms under normal driving
conditions otherwise the ty-raps could break over time.
Tech 101: At this point you are probably wondering why the adjustable feature of the Ingalls control
arms is so important. First, the adjustable feature allows the end user or tuner to modify the rear
suspension geometry and optimize the thrust angle on cars that are built slightly off or have been
involved in an accident. Second, components that are adjustable are just too cool. On our product
development car, thrust angle was off considerably. Installing Ingalls new adjustable panhard bar will
further improve thrust angle by relocating the bar slightly. Once you have the new panhard bar
installed you can take new measurements and fine-tune the rear suspension based on that alignment
data. The high range of adjustment that Ingalls provides is more than adequate for most scenarios.
Limited Warranty
Subject to Disclaimer. All Ingalls products are warranted against defects in materials and workmanship for ninety (90) days from date of purchase.
During the warranty period, Ingalls will repair, or at its option replace at no charge, components that prove to be defective. The product must be
returned, shipping prepaid, to Ingalls facility. This limited warranty does not apply if the product is damaged by accident or misuse. The foregoing
warranty is in lieu of all other warranties expressed or implied including but not limited to any implied warranty of merchantability, fitness, or adequacy for
any particular purpose or use. Ingalls shall not be liable for any special, incidental or consequential damages whether in contract, tort, or otherwise
resulting from the use or the inability to use the product.
Warranty Disclaimer
Use of this product in competition, or use on vehicles altered from original manufacturer’s specifications or settings, EXPRESSLY VOIDS WARRANTY.
The user is urged to inspect for suspension binding or interference when the product is used in these manners. However, due to the varying conditions
and manner of use which the product will be subjected to in such uses, Ingalls Engineering Co., Inc. makes no warranties, either express or implied,
including any warranty of merchantability or fitness for a particular purpose for use in competition or with specifications or settings other than those
specified by the original manufacturer’s specifications.
For more information on Ingalls products, visit us on the web at www.ingallseng.com
or contact us by calling 1-800-641-9795