Ingalls 93040 - Manual (Page 2)

© Ingalls Engineering Co., Inc. ● 2011 Cherry Street, Suite 104 ● Louisville CO 80027
(800) 641-9795 ● (303) 665-7800 ● Fax: (303) 665-7810 ● www.ingallseng.com
Illustration 1 Illustration 2 Illustration 3
Illustration 4
Note: Do not attempt to adjust Stiffy™ from its pre-set stiffness without consulting the Ingalls website. Large open-
end wrenches are required to adjust stiffness. Most standard and mechanics tool kits do not include these types of
wrenches. MAKE SURE THAT THE HOLES OF THE DAMPER LINE UP WITH THE BRACKET HOLES AND ARE
COMPLETELY CENTERED.
IMPORTANT***IMPORTANT***IMPORTANT***
MAKE SURE IF YOU ADJUST THE LENGTH OF THE DAMPER TO LINE UP
WITH THE BRACKET HOLES!!(especially if you adjust the dampening)You
should adjust the length to make sure it lines up with the bracket holes before
installation. Ingalls WILL NOT warranty these products if you do not adjust the
length to fit onto the brackets causing bending of them.
Limited Warranty
Subject to Disclaimer. All Ingalls products are warranted against defects in materials and workmanship for ninety (90) days from date of purchase. During the
warranty period, Ingalls will repair, or at its option replace at no charge, components that prove to be defective. The product must be returned, shipping prepaid,
to Ingalls facility. This limited warranty does not apply if the product is damaged by accident or misuse. The foregoing warranty is in lieu of all other warranties
expressed or implied including but not limited to any implied warranty of merchantability, fitness, or adequacy for any particular purpose or use. Ingalls shall not
be liable for any special, incidental or consequential damages whether in contract, tort, or otherwise resulting from the use or the inability to use the product.
Warranty Disclaimer
Use of this product in competition, or use on vehicles altered from original manufacturer’s specifications or settings, EXPRESSLY VOIDS WARRANTY. The
user is urged to inspect for suspension binding or interference when the product is used in these manners. However, due to the varying conditions and manner
of use which the product will be subjected to in such uses, Ingalls Engineering Co., Inc. makes no warranties, either express or implied, including any warranty of
merchantability or fitness for a particular purpose for use in competition or with specifications or settings other than those specified by the original manufacturer’s
specifications.