Ingalls 93304 - Manual (Page 3)

Ingalls Engineering Co., Inc. ● 2011 Cherry Street, Suite 104 ● Louisville CO 80027
(800) 641-9795 ● (303) 665-7800 ● Fax: (303) 665-7810 ● www.ingallseng.com
be close and the rear legs of the brace are made from mild steel so they can be moved into place by
hand if fitment is off slightly.
Step 6: From the underside of the car, fit the supplied nut and washer to each of the bolts used to fit
the rear legs of the brace. Once the hardware for the rear legs and main bar at the shock towers has
been fitted, you can torque the OEM nuts on the rear shock towers and hardware used for fitting the
rear legs. Note: The sheet metal area where the rear legs mount may deform slightly and you
should torque the bolts down to the point where the sheet metal starts to deflect.
The Heavy-Duty 4-Point Rear Shock Tower Brace is designed to fit as well as can possibly be
expected considering the heavy-duty 4-point design. This design will offer a huge performance
advantage over traditional 2-point braces, but that performance comes with a minor compromise.
Although the spare tire and all interior linings will fit back into place and cover the whole assembly,
you must modify the interior compartments to retain the jack and accessories. Fortunately this is
fairly easy on the driver’s side of the car, but more difficult on the passenger’s side. Many aftermarket
stereo systems, more or less, render these compartments and other interior trim useless anyway.
Our engineering and design compromises are with performance in mind first and foremost; with the
fitment of OEM trim secondary.
Limited Warranty
Subject to Disclaimer. All Ingalls products are warranted against defects in materials and workmanship for ninety (90) days from date of purchase.
During the warranty period, Ingalls will repair, or at its option replace at no charge, components that prove to be defective. The product must be
returned, shipping prepaid, to Ingalls facility. This limited warranty does not apply if the product is damaged by accident or misuse. The foregoing
warranty is in lieu of all other warranties expressed or implied including but not limited to any implied warranty of merchantability, fitness, or adequacy for
any particular purpose or use. Ingalls shall not be liable for any special, incidental or consequential damages whether in contract, tort, or otherwise
resulting from the use or the inability to use the product.
Warranty Disclaimer
Use of this product in competition, or use on vehicles altered from original manufacturer’s specifications or settings, EXPRESSLY VOIDS WARRANTY.
The user is urged to inspect for suspension binding or interference when the product is used in these manners. However, due to the varying conditions
and manner of use which the product will be subjected to in such uses, Ingalls Engineering Co., Inc. makes no warranties, either express or implied,
including any warranty of merchantability or fitness for a particular purpose for use in competition or with specifications or settings other than those
specified by the original manufacturer’s specifications.