Ingalls 35270 - Manual

Installation Instructions
1. Take alignment readings and determine change to be made.
2. Remove the upper nut and cam bolt from strut. Loosen lower
bolt.
3. Install new camber adjuster bolt so that cam fits between strut
bosses.
4. Install loose cam, lock washer, and nut. Tighten slightly.
5. Turn cam bolt to make desired change.
6. Tighten nut on camber adjuster while holding bolt head
steady.
7. Tighten lower nut on strut bolt to manufacturer's specifica-
tions.
8. After adjusting camber, adjust toe and road test vehicle.
ING3527-72897
Copyright © 1997-04 Ingalls Engineering Co., Inc