Knape&Vogt BYP-150A Series - Manual (Page 3)

4
5
HANG DOORS
ADJUST AND FINISH
• Open quick release latches on brackets.
• Slide door onto carrier screws and close latch.
• Repeat for front door on front rail.
• Adjust door to square with sides of door opening by rotating carrier adjustment screw.
• Install door guide where doors overlap.
• Install door stop to back side
of front door to keep rear
door pull accessible when
front door is opened.
SLIDING DOOR HARDWARE - BY PASS Assembly
Instructions
#310303_A (1012)