Hang doors adjust and finish – Knape&Vogt BYP-75AFW Series User Manual
Page 3
Advertising
4
5
HANG DOORS
ADJUST AND FINISH
• Mount rear door first by tilting door back
and resting hangers on rear rail.
• Repeat for front door on front rail.
• Adjust door to square with sides of door opening for your model as shown.
• Install door guide where doors overlap.
• Install door stop to back side of front door to keep rear door pull accessible
when front door is opened.
OR
SLIDING DOOR HARDWARE - BY PASS
Assembly
Instructions
#310289_B (1112)
Advertising