Sena Bluetooth Bluetooth Audio Pack v1.0 User's Guide - Manual (Page 14)

14
Pairing with Headsets
To record your voice to the GoPro® by using the
Bluetooth Pack, you should pair the Bluetooth
Pack with a Bluetooth headset (or microphone).
This pairing operation is only required once for
each Bluetooth headset.
The Bluetooth Pack will remain paired with
the headsets after the first pairing process is
completed and automatically connected to the
paired headsets again within the connection
range. The pairing procedures of the Sena
headsets are different from those of the
non-Sena headsets. Make sure to follow the
procedures below before pairing each headset.
For Sena Headsets
1
Press and hold the Pairing Button of the
Bluetooth Pack for 5 seconds until the LED
flashes red and blue alternately.
2
Enter into the intercom pairing mode of
the headset. Then the headset is paired
automatically with the Bluetooth Pack.
You do not need to press any buttons for
pairing. For details on intercom pairing,
refer to the user’s guide of Sena headset.
3
When the LED flashes blue, the pairing is
completed. Then you will hear the voice
prompt saying “GoPro Pack connected”
from the connected Sena headset.