Sena Bluetooth Bluetooth Audio Pack v1.0 User's Guide - Manual (Page 15)

15
English For Non-Sena Headsets
1
Press and hold the Pairing Button of the
Bluetooth Pack for 5 seconds until the LED
flashes red and blue alternately.
2
Enter into the handsfree pairing mode
of the non-Sena headset. For details on
handsfree pairing, refer to the user’s guide
of the corresponding headset.
3
When the LED flashes blue, the pairing is
completed. Then you will hear the voice
prompt saying “GoPro Pack connected”
from the connected corresponding
headset.
If the Bluetooth Pack is disconnected from
the paired headset suddenly even within the
connection range, press the Paring Button
once to reconnect to each other.
Start Recording
The Bluetooth Pack will remain paired with
the headsets and the audio channel of the
Bluetooth Pack is open after the first pairing
process is completed. While the audio
channel remains open, your voice or intercom
conversation keeps being transferred to the
GoPro®. Then start recording on the GoPro®,
and your voice will be added to the video.
When you connect the GoPro® to the
Bluetooth Pack with the Audio Connector, the
internal stereo microphones of the GoPro® are
disabled and the internal stereo microphones
of the Bluetooth Pack operate as that of the
GoPro®.