Battery information, Maintenance and care – Sena Bluetooth Bluetooth Audio Pack v1.0 User's Guide User Manual

Page 23

Advertising
background image

23

English

BATTERY INFORMATION

The product has an internal, non-removable, rechargeable

battery. Do not attempt to remove the battery from the

device as you may damage the device. The battery can

be charged and discharged hundreds of times, but it

will eventually wear out. Recharge the battery only with

Sena approved chargers designated for this device. Use

of an unapproved charger may present a risk of fire,

explosion, leakage, or other hazard.
Always try to keep the battery between 15°C and 25°C

(59°F and 77°F). Extreme temperatures reduce the

capacity and lifetime of the battery. A device with a

hot or cold battery may not work temporarily. Battery

performance is particularly limited in temperatures well

below freezing.
Do not dispose of batteries in a fire as they may

explode. Batteries may also explode if damaged. Never

use any charger that is damaged. Operating times

are estimates only and depend on the devices used

together, features used, battery age and condition,

temperatures to which battery is exposed, and many
other factors.

MAINTENANCE AND CARE

The Sena Bluetooth Pack for GoPro® should be treated

with care and the following suggestions will help you

protect your warranty coverage.
1. Do not use or store the device in dusty, dirty areas.

Its moving parts and electronic components can be

damaged.

2. Do not store the device in hot areas. High temperatures

can shorten the life of electronic devices, damage

batteries, and wrap or melt certain plastics.

3. Do not store the device in cold areas. When the device

returns to its normal temperature, moisture can

form inside the device and damage electronic circuit

boards.

4. Do not attempt to open the product.
5. Do not drop or knock the device. Rough handling

can break internal circuit boards and fine mechanics.

6. Do not use harsh chemicals, cleaning solvents, or

strong detergents to clean the device.

7. Do not paint the device. Paint can clog the moving

parts and prevent proper operation.

Advertising