Features of your vehicle – KIA Forte_Forte5_Forte Koup 2012 User Manual

Page 99

Advertising
background image

4 21

Features of your vehicle

D080100ATD

Power windows

The ignition switch must be in the ON
position for power windows to operate.
Each door has a power window switch
that controls the door’s window. The driv-
er has a power window lock switch which
can block the operation of passenger
windows.
The power windows can be operated for
approximately 30 seconds after the igni-
tion key is removed or turned to the ACC
or LOCK position. However, if the front
doors are opened, the power windows
cannot be operated even within the 30
second period.

NOTICE

While driving with the rear windows
down or with the sunroof (if equipped)
in an open (or partially open) position,
your vehicle may demonstrate a wind
buffeting or pulsation noise. This noise
is a normal occurrence and can be
reduced or eliminated by taking the fol-
lowing actions. If the noise occurs with
one or both of the rear windows down,
partially lower both front windows
approximately one inch. If you experi-
ence the noise with the sunroof open,
slightly reduce the size of the sunroof
opening.

D080101AUN

Window opening and closing
(if equipped)

The driver’s door has a master power
window switch that controls all the win-
dows in the vehicle.
To open or close a window, press down
or pull up the front portion of the corre-
sponding switch to the first detent posi-
tion (5).

D080102AAM

Auto down window (if equipped)
(Driver’s window)

Pressing the power window switch
momentarily to the second detent posi-
tion (6) completely lowers the driver’s
window even when the switch is
released. To stop the window at the
desired position while the window is in
operation, momentarily pull up the switch
to the opposite direction of the window
movement.

D080104AAM

Power window lock button
(if equipped)

• The driver can disable the power win-

dow switches on the passenger door
by pressing the power window lock
switch located on the driver’s door to
the LOCK position (pressed).

• When the power window lock button

is in the LOCK position (pressed),
the driver’s master control cannot
operate the passenger door power
windows.

OTD049013

Advertising
This manual is related to the following products: