KIA Borrego 2010 User Manual

Page 154

Advertising
background image

Features of your vehicle

74

4

D190403AHM

Auto light position (if equipped)

When the light switch is in the AUTO light
position, the taillights and headlights will
turn ON or OFF automatically depending
on the amount of light outside the vehi-
cle.

D190500AUN

High beam operation

To turn on the high beam headlights,
push the lever away from you. Pull it back
for low beams.
The high beam indicator will light when
the headlight high beams are switched
on.
To prevent the battery from being dis-
charged, do not leave the lights on for a
prolonged time while the engine is not
running.

OHM049069L

CAUTION

• Never place anything over sensor

(1) located on the instrument
panel. This will ensure better
auto-light system control.

• Don’t clean the sensor using a

window cleaner. The cleaner may
leave a light film which could
interfere with sensor operation.

• If your vehicle has window tint or

other types of coating on the
front windshield, the Auto light
system may not work properly.

OHM048067L

Advertising