Maintenance – KIA Borrego 2010 User Manual

Page 401

Advertising
background image

Maintenance

12

7

G050800AUN

Air cleaner filter

A Genuine KIA air cleaner filter is recom-
mended when the filter is replaced.

G050900AUN

Spark plugs

Make sure to install new spark plugs of
the correct heat range.

G051000AHM

Valve clearance (3.8L)

Inspect for excessive valve noise and/or
engine vibration and adjust if necessary.
An authorized KIA dealer should perform
the operation.

G051100AHM

Cooling system

Check the cooling system components,
such as the radiator, coolant reservoir,
hoses and connections for leakage and
damage. Replace any damaged parts.

G051200AUN

Coolant

The coolant should be changed at the
intervals specified in the maintenance
schedule.

G051500AUN

Brake hoses and lines

Visually check for proper installation,
chafing, cracks, deterioration and any
leakage. Replace any deteriorated or
damaged parts immediately.

G051600AHM

Brake fluid

Check the brake fluid level in the brake
fluid reservoir. The level should be
between “MIN” and “MAX” marks on the
side of the reservoir. Use only hydraulic
brake fluid conforming to DOT 3 or DOT
4 specification.

G051700AUN

Parking brake

Inspect the parking brake system includ-
ing the parking brake pedal and cables.

G051900AUN

Brake discs, pads, calipers and
rotors

Check the pads for excessive wear, discs
for run out and wear, and calipers for fluid
leakage.

G052000AUN

Exhaust pipe and muffler

Visually inspect the exhaust pipes, muf-
fler and hangers for cracks, deterioration,
or damage. Start the engine and listen
carefully for any exhaust gas leakage.
Tighten connections or replace parts as
necessary.

G052100AUN

Suspension mounting bolts

Check the suspension connections for
looseness or damage. Retighten to the
specified torque.

Advertising