KIA Borrego 2010 - Manual (Page 294)

Features of your vehicle
214 4
AUX mode (auxiliary device input)
✽ ✽ NOTICE
The AUX1/AUX2 mode will operate only
when an auxiliary AUDIO & VIDEO
player (camcorder, vehicle VCR, etc.) is
connected and operating.
Starting AUX mode by use of Rear
panel
1. Press the [MODE] button on the REAR
panel to display the MODE selection
screen.
2. If the key on the joystick located at the
far right-side of the REAR panel is
moved in any direction, the select area
will become displayed on the button of
the most recently operated mode.
3. Select the AUX button.
4. Select the AUX1 or AUX2 button in the
AUX mode screen.
5. The AUX1, AUX2 will begin playing.
✽ ✽ NOTICE
If the auxiliary device connector jack is
removed while in AUX mode, the previ-
ous mode will automatically be dis-
played.
Pressing the AUX1, AUX2 button while
the auxiliary device is not is not connect-
ed or with only the VIDEO jack connect-
ed will display a "The device is not prop-
erly connected" message.
CAUTION
1. Having the auxiliary cable con-
nected even when there is no
auxiliary device can convert the
device into AUX mode and cause
noise.
Please make sure to remove the
auxiliary cable when an auxiliary
device is not being used.
2. Connecting an auxiliary device to
the cigarette jack and playing
through the screen of the device
may cause an occurrence of
noise.
If such noise occurs, remove the
power cable from the cigarette
jack.