Newport Brass 2500-5623 - Manual (Page 2)

NWP-106C
Recommended Installation by a Professional Plumbing Contractor
Note: The use of petroleum base plumbers putty on our products will nullify the warranty. We recommend the
use of clear silicone sealing materials. Recommended deck thru hole Ø 1.25" to Ø1.38
INSTALLING FAUCET ON SINK (See Fig 1)
· Place the faucet inlet and mounting stud through escutcheon, o-ring, and mounting surface hole.
· Slide gasket and mounting cresent over mounting stud on underside of mounting surface and secure into place
with mounting nut.
Figure 1
Mounting nut
Mounting
Crescent
Rubber gasket
O-ring
Escutcheon
Mounting surface
& hole