Newport Brass 2500-5623 - Manual (Page 3)

ATTACHING WATER SUPPLY CONNECTION (See Fig 2)
· Slide the 1/4” OD supply tube (not included) through compression nut and compression
sleeve. Place insert into end of tube.
· Insert the end of tube into faucet inlet and thread compression nut onto the end of inlet.
3. TEST INSTALLED FAUCET
· With handle in OFF position, turn on water supplies and check all connections for leaks.
Figure 2
(949) 417-5207
NWP-106C Santa Ana, Ca. 92705 06/20/2013
www.brasstech.com
Connect to
water supply
(not included)
1/4” OD Tubing
(not included)
Compression
nut
Compression
sleeve
Insert
Faucet inlet