ZMODO ZMD-DT-SCN4 User Manual

Page 22

Advertising
background image

H.264 Super Digital Video Recorder User Manual

21

the input blank, write the preset points, then click Preset button, PTZ turn to the corresponding

preset point.

Picture 3.10 PTZ Control

2、tour

Multiple preset points connected cruise lines, call cruise between points, the PTZ run around

on the line

1)Cruise Between Points Settings

Cruise lines are connected by multiple preset points, setting procedure is as follows:

Step1: In Picture 3.8, the Direction key will turn PTZ to designated location, click Settings

button to enter Picture 3.11.

Step 2: click Cruise buttons, the write proper value into the Cruise Line and Preset Points

blank,then click Add Preset Points button, complete setting (also can add and delete cruise line

which has been set up).

Step 3: repeat step1 and step2, until set out all the preset designated cruise lines.

Remove Preset:Please input preset value in the blank, click Remove Preset button, then

remove the preset points.

Remove Cruise Line:Input the number of cruise line, click Remove Cruise Lines button, then

remove the cruise lines set.

Value input blank

Advertising
This manual is related to the following products: