ZMODO ZMD-DT-SCN4 - Manual (Page 61)

H.264 Super Digital Video Recorder User Manual
60
5. Network access settings and cloud technology introduced
5.1 LAN access settings
1、Network connection
1. Before the WEB operation, need to connect this device with the network.
2. Enter DVR “main menu” “network” to set correct IP address, subnet mask and gateway port
default (the IP segment of the device should be the same with PC computer, if disconnected, pls
check device IP was connected successfully.)
2、Login
Step 1: after connecting successfully, then you can login to view.
Open a web browser; enter the IP address of the login device in the address bar. As the
device with IP address 192.168.1.10, HTTP port 80 for example, then enter:
http://192.168.1.10 in the address bar and connections.
If HTTP port is not 80, such as 81, then need to add port when viewing,
as: http://192.168.1.10:81
Note: If the PC connects the device at first time, when open system, the security warning will pop up
whether to accept the WEB control web. cab, please choose to accept the user, the system will
automatically identify the installation. (If the system is prohibited to download, please confirm whether
you have other prohibited controls to download plug-ins, and reduce the IE security level, permit
unsigned plug-in to operate. Connection as shown below will pop up after the success of the interface.
Picture 5.1 WEB Login interface
Step 2: Login. Enter the user name and password, the company factory default administrator user
name admin, password is 111111. After login, please promptly change the administrator
password.
Login is successful, display the interface as shown below.