ZMODO ZMD-DT-SCN4 User Manual

Page 35

Advertising
background image

H.264 Super Digital Video Recorder User Manual

34

lower Stream statics, the worse recording stream statics quality and occupies less

HDD capacity.

Recording plan: Set DVR’s recording plan

Picture 4.5 Recording Plan

Channel: Choose the corresponding channel number to set the channel. Choose the all option to

set the entire channels.

Redundancy: Choose the redundancy function option to implement the file double backup function.

Double backup is writing the video files in two hard disks. When you do the double

backup, make sure that there are two hard disks installed. One is read-write disk and

the other is redundant disk. (Pls refer 4.7.1 HDD manage to have detailed setting

methods)

Length: Set the time length of each video file. 60minutes is default value (A maximum of 120

minutes).

Pre Record: Record 1-30 seconds before the action. (Time length is decided by the code stream)

Mode: Set video state: configuration, all or stop.

Schedule:Record according to the set video type (common, detection and alarm)and time

section.

Manual: after choosing manual button, the related channel will carry common recording

whatever state the current channel is.

Stop:Click the stop button and the according channel stops recording no matter the channel

in any state.

Week: set (Monday to Sunday) or full week to record, it will just record in set days

Period: Set the time section of common recording, the recording will start only in the set range.

Recording type: Set recording type: regular, detection or alarm.

Regular:Perform the regular recording in the set time section. The video file type is

“R”.

Detect:Trigger the “motion detect”, “camera mask” or “video loss” signal. When

above alarm is set as opening recording, the “detection recording” state is on. The

Advertising
This manual is related to the following products: