ZMODO ZP-IBH13-P 720P HD H.264 PoE IP Infrared Weatherproof Camera with QR Code Smartphone Setup - Manual of How to Access IP Camera - Manual (Page 113)

Chapter 4 Access to IP Camera on Internet Explorer
112
4.6.4 Alarm Settings
▲ Motion Alarm
Figure 38
[Protection Time Setting] Set the time of motion detection. It can set detailed time periode of
everyday, up to four different time periods.
[Motion Detection Switch] Set whether to edit the mobile area or open the motion detection.
[Motion Detection Setting] After enable motion detection switch, the setting interface will appear grid
line. User only needs to right click the little cube on the image to set the motion detection area. Double
click the little cube to cancel related area detection.
[Alarm Action Mode] Set linkage output format after triggered alarm. Sound alarm or sending email
can be selected. Sending email is sending motion detection alarm information via email to user.
[Sensitivity] The sensitivity of motion detection includes four levels: Highest, High, Medium, and Low.
[Output delay] Set the delay time of alarm linkage. The time range is limited between 0~30.
After setting all parameters, click the [Submit] button.