ZMODO ZP-IBH13-P 720P HD H.264 PoE IP Infrared Weatherproof Camera with QR Code Smartphone Setup - Manual of How to Access IP Camera - Manual (Page 87)

Chapter 4 Access to IP Camera on Internet Explorer
86
Figure 3
In the Networking tab of the IPC Config menu, you will need to change the settings of the camera to
match your router settings (As Figure4).
1. In the IP field, type in the same IP address that appeared as the IPv4 Address on your ipconfig
results, but label the last three digits to a larger value such as 101.
2. In the Gateway field, type in the same numbers that appeared as the Default Gateway in your
ipconfig results.
3. In the Sub Mask field, type in the same numbers that appeared as the Subnet Mask on your ipconfig
results.
Figure 4
After adjusting all of these settings, click [Save]. The IP Address, Gateway, and Sub Mask should
update immediately after you click [Save].