ZMODO ZP-IBH13-P 720P HD H.264 PoE IP Infrared Weatherproof Camera with QR Code Smartphone Setup - Manual of How to Access IP Camera - Manual (Page 86)

Chapter 4 Access to IP Camera on Internet Explorer
85
4.1.2 Network Configuration
In order to login and view your IP Camera from Internet Explorer, you will need to first find out the IP
Address Segment, Default Gateway, and Subnet Mask of your computer.
To find out the IP Address Segment, Default Gateway, and Subnet Mask, you will need to open the
command prompt from a Windows PC that is connected to the same router that your IP Camera will be
connected to.
To open a Command Prompt, press the Windows Key and R at the same time on your keyboard. Type
"cmd" in the run line and press "Enter."
In the new window that appears, type "ipconfig" then press "Enter." Make note of your IPv4 Address,
Subnet Mask, and Default Gateway. You will need this information later.
Open the program called IPCSearch
(Download from http://www.zmodo.com/support-software/ )
Click the [Refresh] button on the upper right side of the IPCSearch program. Your IP Camera should
appear in the list of items, if your IP Camera is successfully connected to the same router as your PC is
connected to (As Figure 2).
Figure 2
Double-Click on your IP Camera in the IPC Search program, and you will have the option to change
some of the network settings (As Figure 3).