Airbagit 24 Function Remote - Manual

24 Function Remote
Installation Instructions
(click on each image to purchase individual parts)
DIAGRAM #20 24FUN REMOTE.PDF
Learning Switch
LED Indicator
ANTENNA
Working Voltage: +12V+/-3V/DC
Working Frequency: 315MHz
HOW TO PROGRAM THE REMOTE CONTROLLER:
PLEASE INSTRUCTIONS BEFORE PROGRAMMING.
1) PRESS AND RELEASE THE LEARNING SWITCH,
THE LED INDICATOR WILL TURN ON.
2) PRESS ANY BUTTON OF REMOTE CONTROLLER
WITHIN 10 SECONDS.
3) THE LED INDICATOR TURNS OFF IF LEARNING
PROGRAM IS SUCCESSFUL.
4) IF NO REMOTE THERE IS NO CONTROLLER
ACTIVITY WITHIN 10 SECONDS, THE LEARNING
PROGRAM STOPS AUTOMATICALLY AND THE LED
INDICATOR TURNS OFF.
5) MAXIMUM OF 2 AMPS PER CHANNEL
6) DO NOT USE ON OTHER APPLICATIONS WITHOUT
INSTALLING AN EXTERNAL RELAY. DOING SO WILL
GUARANTEE YOU BURNING UP THE REMOTE UNIT.