Derale Performance 6 Pass Series 7000 Aluminum_Copper Universal Engine Oil Cooler Kit, Spin On Adapter - Manual (Page 3)

Derale Performance, Los Angeles, CA 800.421.6288 www.derale.com
VEHICLE TESTING
1. Start the engine and quickly check all connections for leaks.
2. Turn-off the engine and check oil level.
3. Add oil as needed.
ROUTING HOSES
Note:
Important:
Note:
The Cooler core will flow in either direction; there is no specified inlet or outlet port.
The oil flow direction should go in the following order: Engine, Ports Up Filter Mount, Oil Cooler, and then back to the
Engine. (See Diagram #6)
1. Using the remaining four Hose Clamps supplied, route the looped hose from the Oil Cooler along the frame toward the Ports
Up Filter Mount and/or the Spin-on Adapter.
When routing hoses, be sure to keep all hoses away from sharp edges, moving parts and hot engine components. Hoses
should be routed carefully and should not be bent in less than a 5” radius.
2. Attach either hose coming from the Oil Cooler to the “OUT” port on the Ports Up Filter Mount.
3. Attach the remaining hose on the Oil Cooler to the “IN” port on the Spin-on Adapter.
4. Attach a hose from the “OUT” port on the Spin-on Adapter to the “IN” port on the Ports Up Filter Mount.
5. Apply a light coat of oil onto the O-ring of your new oil filter and install on the Ports Up Filter Mount.
Warning: Installation of accessories should only be undertaken by those with mechanical knowledge and are familiar with working on
vehicles. Always use eye protection (goggles, safety glasses or shield). Park the vehicle in a well lit area, on level ground and apply the
parking brake. Only work on a cold vehicle that has been sitting overnight, failure to do so will result in severe burns and injury. Before starting
the vehicle, make sure no tools or any other items are left under hood that could interfere with or be drawn into moving parts of the engine.
Failure to follow instructions can lead to severe damage and personal injury.
(Page 3)
Spin-On
Adapter
Ports Up
Filter Mount
Oil
Cooler
Fire Wall
Diagram #6