S&B Filters Cold Air Intake Kit - Cotton Filter 75-2557 - Manual (Page 2)

9/12/2006
Testing & Warranty Info:
1. Engage parking brake and start your
engine. To ensure that the system was in-
stalled properly, listen for abnormal noises. If
an air leak is detected, re-inspect hoses and
connections as they may need to be tight-
ened.
2. We recommend that you keep your stock
(OEM) intake system in the event that is
required in the future.
3. In order to maintain proper warranty, all
connections and components must be
checked periodically for realignment, clean-
ing and / or retighten of all connections.
Failure to do so may void your warranty.
4. We recommend that you only use S&B
oil and cleaner products to service your filter.
Using any other manufacturer’s products
may void your warranty.
INSTALLATION INSTRUCTIONS
(continued)
16. Reconnect the mass air sensor.
17. Use the small hose clamp to connect the 5/8”
hose to the valve cover connection, and the 1/2-
5/8” hose mender to the S&B air box.
13. Push the S&B air box assembly into the
hose adaptor on the S&B air intake tube.
18. Install the S&B High Performance Filter. 14. Bolt down the S&B air box. Use the 1/4”
fender washer; top and bottom.
20. Attach the clear lid to the S&B air box.
21. Reconnect the negative side battery cable
and installation is complete.
15. Tighten all of the hose clamps.
Smog Certification Note:
The California Air Resource Board
(CARB) requires that an E.O. identifica-
tion label be applied to the vehicle in order
to pass a smog check inspection when
installing a High Performance Intake Kit.
You must place the E.O. label provided on
or near the intake kit after installation so
that the smog technician can easily verify
the O.E. number during the smog certifica-
tion process.
787 S. Wanamaker Ave, Ontario, CA 91761
(909) 947-0015 Phone • (909) 947-0603 Fax
www.sbfilters.com
S&B’S Precision Cleaning & Oiling Kit allows vehicle owners to properly
maintain their high performance air filters by precisely applying the correct
amount of oil. The clearly marked bottle and easy-to-use applicator allow the
user to measure and apply the proper amount of oil for each application. S&B
has conducted extensive testing with the Precision Cleaning Kit to ensure that
it can be used on most cotton high performance filters available today.
Part No. 88-0005
Order online today at www.sbfilters.com
or though your local S&B Distributor
RESTORE YOUR HIGH PERFORMANCE FILTER