S&B Filters Cold Air Intake Kit - Cotton Filter 75-5044 - Manual (Page 2)

7/29/2008
13. Remove the protective covering from the
S&B Clear Lid (C).
14. Place the clear lid on the air box and
secure using the 8/32 SS Screws (A) and SS
Washers (B).
15. Reconnect both negative battery cables.
16. Inspect your installation, make sure kit
is properly positioned and all fasteners are
secure.
PERFORMANCE TESTING
∗ Engage parking brake and start your
engine. Listen for abnormal noises. If an
air leak is detected, re-inspect hoses and
connections as they may need to be
repositioned and tightened.
∗ S&B FILTERS recommends that you
keep your OE intake system in the event
it is required in the future.
∗ In order to maintain your warranty, all
connections and components must be
checked periodically for alignment and
for proper tension on all connections.
Failure to do so may void your warranty.
∗ Use only S&B FILTERS cleaning and oil
products to service your filter. Using any
other brand oil and or cleaners on your
S&B air filter may void your warranty.
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS
(continued) (continued)
(909) 947-0015 Phone (909) 947-0603 FAX
www.sbfilters.com