S&B Filters Cold Air Intake Kit - Cotton Filter 75-5017 - Manual (Page 2)

1/18/2008
PERFORMANCE TESTING
∗
Engage parking brake and start
your engine. Listen for abnormal
noises. If an air leak is detected,
re-inspect hoses and connections
as they may need to be reposi-
tioned and tightened.
∗ S&B FILTERS RECOMMENDS
THAT YOU KEEP YOUR OEM
INTAKE SYSTEM IN THE
EVENT IT IS REQURIED IN THE
FUTURE.
∗ In order to maintain your war-
ranty, all connections and com-
ponents must be checked peri-
odically for alignment and for
proper tension on all connec-
tions. Failure to do so will void
your warranty.
∗ Use only S&B Filter cleaning and
oil products to service your filter.
Using any other brand oil and or
cleaners may void your warranty.
(909) 947-0015 Phone • (909) 947-0603 Fax
www.sbfilters.net
INSTALLATION INSTRUCTIONS
(continued)
12. Note: It may be necessary to loosen all
hose clamps and reposition tubes for proper
fit and to locate mounting hole for the air
box. Retighten hose clamps.
13. Install S&B air filter (W) onto S&B
flange adapter tube (C) and secure with #64
hose clamp (U).
14. Place S&B clear lid (Z) on top of S&B
air box (J) and secure with 10-32 screws (Y)
and rubber washers (X).
Note: Do not over tighten.
15. Assemble the S&B Oil Catch (M), use
the 5/16 x 1/2” bolt and lock washer to
mount the oil catch on top of the frame
where the OE air box push locks were in-
serted. Use the hole on the drivers side.
Do not over tighten! See step # 4.
16. Connect the OE crank case hose to
the 90 degree 1/2” hose barb on the oil
catch assembly.
17. Install the OE Kick Plate.
18. Install the OE Drive Shaft Cover.
19. Install the OE Engine Cover.
20. Install the OE Parking Brake Lever and
reposition the shift boot so as to fit tightly
against the engine cover.
S&B’S Precision Cleaning & Oiling
Kit allows vehicle owners to properly
maintain their high performance air
filters by precisely applying the cor-
rect amount of oil. The clearly
marked bottle and easy-to-use appli-
Order online today at www.sbfilters.com
or though your local S&B Distributor
Part No. 88-0005
21. Install the Driver and Passenger seats. The
installation is now complete.