S&B Filters Cold Air Intake Kit - Cotton Filter 75-5004 - Manual (Page 2)

6/5/2008
REV-A
INSTALLATION INSTRUCTIONS
(continued)
15. Install the tube into the air filter
then onto the throttle body.
20. Install the clear lid, do not over
tighten the screws.
16. Use another #60 hose clamp and
secure the tube to the throttle body.
21. Reconnect the battery and check your
installation. Make sure kit is properly posi-
tioned and all fasteners are secure.
17. Reconnect the MAF sensor.
18. Install the threaded hose barb into
the tube then slip the 1/2” hose over
the barb.
19. Insert the 1/2” to 5/8” hose barb into the
long 1/2” hose then the short 5/8” hose over
the other end and connect to the valve cover.
Secure with the #8 hose clamp.
14. Install the adapter on the intake
tube. Secure with a #60 hose clamp.
Testing & Warranty Info:
1. Engage parking brake and start your
engine. To ensure that the system was
installed properly, listen for abnormal
noises. If an air leak is detected, re-inspect
hoses and connections as they may need
to be tightened.
2. We recommend that you keep your
stock (OEM) intake system in the event
that is required in the future.
3. In order to maintain proper warranty,
all connections and components must be
checked periodically for realignment,
cleaning and / or retighten of all connec-
tions. Failure to do so may void your war-
ranty.
4. We recommend that you only use S&B
oil and cleaner products to service your
filter. Using any other manufacturer’s
products may void your warranty.
Smog Certification Note:
The California Air Resource Board (CARB) requires
that an E.O. identification label be applied to the vehi-
cle in order to pass a smog check inspection when
installing a High Performance Intake Kit.
You must place the E.O. label provided on or near the
intake kit after installation so that the smog technician
can easily verify the O.E. number during the smog
certification process.
S&B’S Precision Cleaning & Oiling Kit allows vehicle owners to properly maintain their high
performance air filters by precisely applying the correct amount of oil. The clearly marked
bottle and easy-to-use applicator allow the user to measure and apply the proper amount of oil
for each application. S&B has conducted extensive testing with the Precision Cleaning Kit to
ensure that it can be used on most cotton high performance filters available today.
Part No. 88-0005
Order online today at www.sbfilters.com or though your local S&B Distributor
787 S. Wanamaker Ave, Ontario, CA 91761
(909) 947-0015 Phone • (909) 947-0603 Fax
www.sbfilters.com