S&B Filters Cold Air Intake Kit - Cotton Filter 75-2545 - Manual (Page 2)

9/12/2006
787 S. Wanamaker Ave Ontario, CA 91761
(909) 947-0015, (909) 947-0603 Fax
www.sbfilters.com
INSTALLATION INSTRUCTIONS
(continued)
Testing & Warranty Info:
1. Engage parking brake and start your
engine. To ensure that the system was in-
stalled properly, listen for abnormal noises. If
an air leak is detected, re-inspect hoses and
connections as they may need to be tight-
ened.
2. We recommend that you keep your stock
(OEM) intake system in the event that is
required in the future.
3. In order to maintain proper warranty, all
connections and components must be
checked periodically for alignment, re-
tightening of all the connections and clean-
ing. Failure to do so may void your warranty.
4. We recommend that you only use S&B
oil and cleaner products to service your filter.
Using any other manufacturer’s products
may void your warranty.
13. Push the grommet into the tube & push
hose mender into grommet.
14. Attach the Cold Air intake tube to MAF
sensor assembly and to throttle body.
15. Tighten hose clamps on intake
tube.
16. Attach the crankcase breather hose
to intake tube.
17. Attach other vent hose to intake tube.
18. Gently push in the air temp. sensor and
connect the MAF sensor.
19. Install S&B air filter and the clear air
box lid using the supplied hardware.
20. Reconnect the negative battery termi-
nal and installation is complete.