S&B Filters Cold Air Intake Kit - Cotton Filter 75-9014-1 - Manual (Page 2)

12/20/2006
PERFORMANCE TESTING
∗ Engage parking brake and
start your engine. To ensure
that the system was in-
stalled properly, listen for
abnormal noises. If an air
leak is detected, re-inspect
hoses and connections as
they may need to be tight-
ened.
∗ S&B FILTERS RECOM-
MENDS THAT YOU KEEP
YOUR OEM INTAKE SYS-
TEM IN THE EVENT IT IS
REQURIED IN THE FU-
TURE.
∗ In order to maintain proper
warranty, all connections
and components must be
checked periodically for re-
alignment and to tighten all
connections. Failure to do
so will void your warranty.
∗ Use only S&B cleaning and
oil products to service your
filter. Using other company’s
oil and cleaner products
may void your warranty.
Please call (909) 947-0015
should you have any ques-
tions or comments.
(909) 947-0015 Telephone - (909) 947-0603 Fax
www.sbfilters.com
INSTALLATION INSTRUCTIONS
(continued)
10. Attach the provided gasket onto the mass
air sensor. Sticky side toward the sensor
base.
11. Install the mass air sensor into the S&B
cold air tube
12. Attach the throttle body adaptor cuff to the
S&B cold air tube. Install the hose barb fittings
in the order shown and tighten all barbs and
hose clamps
13. Install the S&B cold air box and tighten the
box
14. Install the S&B cold air tube thru the air
box and attach it to the throttle body.
Leave the hose clamp “semi tight for ad-
justment
15. Slide the hose clamp that secures the filter
onto the S&B cold air tube
16. Connect the S&B high performance filter
to the S&B cold air tube. Push the filter tight
against the wall of the box. Tighten the hose
clamps for the filter. Tighten the hose clamps
for the cold air tube
20.Re-attach the throttle body cover. Secure the
air box lid to the S&B cold air box . Reconnect the
negative side of the battery.
17. Connect all of the vacuum hoses as shown
18. Connect the mass air sensor electrical
connection
19. Attach the A.C. hose to the S&B cold air
intake tube.