S&B Filters Cold Air Intake Kit - Cotton Filter 75-1511-1 - Manual (Page 2)

4/26/2007
PERFORMANCE TESTING
∗
Engage parking brake and start
your engine. Listen for abnormal
noises. If an air leak is detected,
re-inspect hoses and connections
as they may need to be reposi-
tioned and tightened.
∗ S&B FILTERS RECOMMENDS
THAT YOU KEEP YOUR OEM
INTAKE SYSTEM IN THE
EVENT IT IS REQURIED IN THE
FUTURE.
∗ In order to maintain your war-
ranty, all connections and com-
ponents must be checked peri-
odically for alignment and for
proper tension on all connec-
tions. Failure to do so will void
your warranty.
∗ Use only S&B Filter cleaning and
oil products to service your filter.
Using any other brand oil and or
cleaners may void your warranty.
(909) 947-0015 Phone • (909) 947-0603 Fax
www.sbfilters.net
INSTALLATION INSTRUCTIONS
(continued)
11. Install the 1/4” fender washer and nut
onto “S” bolt and tighten securely. Do
not over tighten the nut.
S&B’S Precision Cleaning & Oiling
Kit allows vehicle owners to properly
maintain their high performance air
filters by precisely applying the cor-
rect amount of oil. The clearly
marked bottle and easy-to-use appli-
Order online today at www.sbfilters.com
or though your local S&B Distributor
Part No. 88-0005
12. Install crank case vent line from the
intake tube to the fitting on the valve
cover.
13. Slide the filter’s hose clamp over the
air tube first and then install the air filter
into the air box. Push the filter against
the inner wall of the air box and tighten
hose clamp securely.
14. Install clear intake box lid using supplied
sealing washers and SS pan head screws.
15. Ensure all connections are tight and posi-
tioned properly before starting vehicle.
Reconnect negative battery terminal.
Adhere the CARB sticker in plain sight
under the hood.