Installation instructions (continued), Testing and maintenance – S&B Filters Intake Elbow 76-1003B User Manual
Page 2
15461 Slover Ave., Fontana, CA 92337 - Phone: (909) 947-0015 - Fax: (909) 947-0603 -
Installation Instructions (continued)
17.
Position the upper T-bolt clamps as to
not hit the hood when closed and torque them
both to 90 In.lbs.
14.
Place the other supplied T-bolt clamp
(G)
over the end of the Straight coupler
(F)
.
15.
Insert the S&B Elbow
(A)
into the
Straight coupler
(F)
and align the bolt holes
with the intake manifold. Be sure the OE O-
ring is still in place and clean both mating
surfaces prior to installing.
16.
Insert the M6x30mm Bolts
(D)
and
M6x93mm Bolts
(C)
in the proper locations
and torque to 100 In.lbs.
18.
Reinstall the Intake or OE air cleaner
and filter removed in Step 3.
2
19.
Align the upper fan shroud and snap it
back into place if it was removed.
20.
Reconnect both batteries. Inspect your
installation, make sure the elbow and boost
tube is properly positioned and all fasteners
are secure. The installation is now complete.
SEE EXPLODED VIEW ON PAGE 3
11.
Place one the supplied T-bolt camps
(G)
over the Straight Coupler
(F)
and slide it on
the upper end (Large diameter) of the Boost
Tube
(H)
.
10.
Place the OE clamps over the Hump
Coupler
(I)
and slide the coupler over the
lower flange of the intercooler.
12.
Snake the Boost tube assembly into
position and into the Hump coupler
(I)
.
13.
Position the OE clamps and torque
them to 106 In.lbs.
P/N: 76-1003 / 76-1003B
Testing and Maintenance
• Engage parking brake and start your engine.
Listen for abnormal noises. If an air leak is
detected, re-inspect hoses and connections as
they may need to be repositioned and tightened.
• S&B Filters recommends that you keep your OE
intake system in the event it is required in the
future.
• In order to maintain your warranty, all connections
and components must be checked periodically for
alignment and for proper tension on all
connections every 6-12 months. Failure to do so
may void your warranty.
• Use only S&B FILTERS cleaning and oil products
to service your filter. Using any other brand oil
and or cleaners on your S&B air filter will void
your warranty.