Dowco Power Sports Iron Rider Universal Rain Hood - Manual

Item # 01066
12/8/06
Page 1
Printed in China
accessories
uni
versal
Installation Instructions
Iron Rider Rain Hood
Please Read! Please read and understand these instructions completely before installa-
tion to avoid possible injury to yourself, or damage to the accessory or vehicle. Read all
Cautions, Warnings and Notes within installation instructions and on bags. If you are
unsure about securing the bag, please contact us at 1-800-558-7755 ext. 123. Monday
through Friday 8:00 am - 4:30 pm CST
1. PARTS LIST:
This Product contains the following components. Before beginning installation confirm there are no
missing or damaged components.
Item # Description Qty
1. Rain Hood 1
2. PREPARATION:
a. Mount luggage to bike as instructed by the
luggage manufacturer.
b. All straps on rain hood should be extended
to the fully opened position. (Fig. 1)
c. All cords and Straps on rain hood should
be extended to the fully opened position.
(Fig. 1)
3. INSTALLATION:
a. Place rain hood over luggage so that the
large bottom flap hangs to the rear of bike
(Fig. 2)
b. Adjust straps and cord so that the opening
of the rain hood is level with the bottom of
the rack.
DOWCO, Inc. Fax: 920-682-5891
4230 Clipper Drive Phone: 1-800-558-7755
Manitowoc, WI 54220 Website: www.dowcopowersports.com
*Secure the bag to the vehicle so the bag will not shift during operation. Failure to do so may
result in injury or property damage.
*Verify that straps do not obstruct exhaust system, reflectors, turn signals, or tail lamp. Failure to
do so may result in injury or property damage.
*Allowing straps to hang loose may cause damage to product and/or painted finishes. Hanging
straps may become entangled in the wheel or drive chain or belt resulting in serious personal
injury and/or property damage.
!
WARNING
Back of
Rain Hood
Fig. 1
Bottom Flap
Rear Side Flaps
Front Side Flaps
Bottom Flap
Bottom of
Rack
Fig. 2
Straps
Cord