Factory Direct Hardware Hansgrohe 16542 Axor Montreux - Manual

The measurements shown are for reference only.
Products and specifications shown are subject to
change without notice.
Specification sheet revised 12/2007
Axor Montreux Tub Filler,
Rim Mounted
16542XX1
Product Features
Traditional cross handles with 90° ceramic cartridges
Solid brass
Mounts on rim of tub or on tub deck
Flow rate from tub filler: approx. 5.8 gpm @ 44 psi
1/2" male NPT inlets
Includes Axor Montreux handshower -- flow rate 2.5 gpm
Includes 49" handshower hose
Protection against backflow provided by check valve •
•
•
•
•
•
•
•
Code Compliance
This unit meets or exceeds the following:
ASME A112.18.1
CSA B125.1
Listed by IAPMO
Approved for use in Massachusetts •
•
•
•
Available Finishes
Chrome 16542001
Brushed Nickel 16542821
Polished Nickel 16542831
Installation Notes
Not anti-scald -- install in-line pressure balance valve 13418181
if required by local code
Requires 1/2" hot and cold supplies •
•