Crown Audio IQ-P.I.P.-SLM - Manual (Page 8)

Page 8
IQ–P.I.P.–SLM Programmable Input Processor with Load Monitoring for IQ Systems
Reference Manual
Fig. 2.1 The IQ–P.I.P.–SLM Facilities
Front View
Bottom View
SW1
OUT IN
Programmable
Input Processor
AUDIO IN
CH-2 CH-1
AUX
OUT IN
DATA CROWN BUS
SLM#.###
G
B B E F A A
H H
C
CABLE A
CABLE B
ON OFF
1
2
4
8
16
32
64
128
IQ ADDRESS
SWITCH
D
I J K
L
2 Facilities
A. Mounting Screws
The IQ–P.I.P.–SLM is secured to the back panel of the
amplifier with two Phillips-head screws and star-tooth
lock washers. The lock washers are required for proper
ground connection.
B. Balanced Audio Inputs
A 3-pin, Eurostyle ® , removable barrier-block connec-
tor is provided for balanced audio input to each chan-
nel of the amplifier.* These removable connectors
make it easy to attach an input cable with just three
screws. Once the cable is attached, the connector can
be quickly unplugged and, if desired, moved to a dif-
ferent amplifier.
Do not use the Ch.2 input if the ampli-
fier is configured in either Bridge or Parallel-Mono
mode.
*Eurostyle is a registered trademark of Beau Interconnect, Gilford NH.