Xoro HRT 7510 - Manual (Page 54)

14 HRT 7510
Engl
ish
First steps
First Time Installation
After all connections have been made properly, switch on TV and make sure the receiver is
connected to the Main Power. Press POWER button to switch receiver on.
If you are using the receiver for the first time
or restored to Factory Default, the Main
Menu will appear on your TV screen.
1.
OSD Language
2. Country
3. Channel
Search
Navigate with the arrow keys UP and DOWN to
each settings and change the options by
pressing the LEFT and RIGHT button. Press
the EXIT button to leave the setup menu.
OSD Language
Choose a language by using the LEFT and RIGHT button.
Country
Choose the country by using the LEFT and RIGHT button.
Channel Search
Start the channel search by pressing the OK
button on the remote control. The device
changes the picture and shows the channel
search progress.
All found TV or Radio channel will be saved into
the TV or Radio list. After finishing the channel
search the device changes to the live picture of
the first TV channel.