Xoro HRT 7510 - Manual (Page 58)

18 HRT 7510
Engl
ish
Recorder
By pressing the OK button (special broadcast
selected) in the EPG menu all information's are
saved in the Timer.
It is advisable to set the starting and stopping
time of recording some minutes before/after the
broadcast because they never begin in time.
Other options are Repeat and Mode. Repeat
defines if the broadcast is recorded once or
continuous. Mode has to be set to Record if you
want to record a broadcast.
The programmed broadcast show up in the Timer program
list.
Note:
Recordings assume connected USB media!
Recording
If you want to record the actually TV broadcast, please connect an USB storage to the USB port. If
the storage is recognizes by the device please press the REC button on the remote control. The
recording starts immediately.
To abort the recording please press the STOP button and confirm the security query with the OK
button.
Program a record schedule
You can also program the record schedule from
the Live picture. Please press the BLUE button
on the remote control and the Timer
programming appears on the screen.
Press the RED button to add a schedule and
modify the options (see picture above).
Timer