Assembling front half of rack (short bed) – Buyers 1501100 User Manual
Page 4
Advertising
Quality since 1946
4
1. Slide the front crossbar onto the bottom tubes
of the front siderails as shown.
Note: Crossbar
gussets should be facing toward rear of the rack.
2. Assemble the front legs and feet as shown.
Legs and feet are directional. Make sure that leg
gussets are facing toward the rear of the rack. Foot
mounting tabs should face the inside of the bed on
each side. Hand tighten hardware.
3. Slide the assembled legs and feet onto the front
siderails as shown. Leg gussets should be facing
the rear of the rack.
Front
Rear
Front Cross Bar Gusset
G
H
Foot
Mounting
Tab
Leg Gusset
C
Front
Rear
Assembling Front Half of Rack (Short Bed)
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Advertising